Description
Standard Equipment
- 1″ Bimetal, High Production Blade
- Carbide Guides with Backup Rollers
- Manually Controlled Vise
- Manually Controlled Blade Tension
- 45° Swiveling Vise
- Semi-Automatic Operation
- Built-in Coolant System
- Console Controlled Blade Speed
- Blade Powered Cleaning Brush
- TEFC Motors
- Low Voltage and Overload Protection
- Hydraulic Oil
- Fused Disconnect
- Electrical to NFPA-79 Standards
- Automatic End-of-Cut Shut Down
- Quick and Easy Blade Speed Change
- Blade Speed and Work Selector Chart
- Feed Pressure Monitor/Regulator
- All Safety Guards
- Operator Manual and Parts List
**Additional, factory installed accessories also available–please call for a quote**
Capacity at 90 degrees | Rectangular – 9″ H x 17″ W – Round 9″ |
Capacity at 45 degrees | Rectangular – 9″ H x 8″ W – Round 8″ |
Weight | 2000 lbs |
Blade Speed Range | 70-380 SFPM |
Blade Width | 1″ |
Blade Length | 11’6″ (138″) |
Blade Guides | Carbide with Roller Blackup |
Blade Tension | Manual with Handwheel |
Bandwheel Size | 14-1/2″ Diameter |
Vise | Manual |
Sawing Force | 30-120 lbs |
Saw Frame to Raise | 16″ in 18 Seconds |
Cycle Time to Lower | 16″ in 12 Seconds |
Blade Drive Motor | 3 HO 3PH or 1-1/2HP 1PH |
Work Height | 26″ |
Coolant Capacity | 10 Gallons |
Shipping Weight | 990 Lbs |
Please Note: Due to the size and weight of some products, shipping and truck delivery must be arranged by phone or email. A Detroit Band Saw specialist will call you to make arrangements and give you the final cost including freight charges.
Reviews
There are no reviews yet.