Description
MACHINE SPECIFICATIONS
Cutting Capacity Round 90° | 0.4″-3.15″ |
Cutting Capacity Square 90° | 0.4″-2.36″ |
Blade Drive | 15 HP VFD |
Blade Speed | 50-200 MPM |
Blade Size | Carbide/ Cermet tipped: 285 mm x 1.7 mm kerf |
Bar Stock Length | 10′-20′ |
Trim Cut | Zero or programmable from 0.4′ or longer |
Cut off Length | Min 0.24” up to 39” |
Single Stroke | 40″ |
Remnant Length | 3.35” + cut length + cutter thickness |
Hydraulic Motor | 3 HP |
Bar Loading Magazine | Inclined storage width of 27.9″ for rounds |
Machine Capacity | 6,613 lbs. |
Machine Weight | 6613 lbs. |
Dimensions (w x l x h) | 85” x 102” x 88″ |
-
Mitsubishi PLC Controller allows for 200 programs to be saved
- Job monitoring with cycle time, job duration, parts count and AMP load setting to protect the saw blade.
-
Material library with US steel grades menu with ability to add custom material grades
-
Bar feed features a material gripper feed carriage indexing via ball screw and AC servo drive. Shuttle speed: 7.87” per second.
-
Heavy duty saw head is driven by ball screw and AC servo drive
-
Mist exhaust system
- Patent pending blade cooling system.
-
Bar retracts automatically for contact free return stroke of the saw blade
-
Universal Bar Loader for round and square material with safety guard sheets provides inclined storage width of 27.9” (710 mm) for rounds, manual incline setting. Capacity: 3,748 lbs.
- PLC controlled automatic oil lubrication of all moving parts
-
Output sorting ensures trim cuts and remnant pieces are sorted automatically from good parts
-
Variable vise pressure control with dial gauge – two stations
- Cooling nozzle
-
Blade lubrication features triple jet system to lubricate blade. If the coolant level gets low, the machine will alarm to alert the operator.
-
Hydraulic rotating wired chip brush rotates in both directions for proper chip removal
-
Status light indicating tower
-
Chip auger
-
Air cooled electric magnetic head break removes all backlash.
-
Built in hydraulic tank and power pack
-
Tool steel hardened saw guide plates
-
Power transformer
- Four blade starter package• Blade specs: 285 mm x 2.0 kerf x 1.70 mm body x 32 mm bore • Pin holes: 4/9/50 mm • Bolt holes: 4/11/63 mm
OPTIONAL FEATURES
-
PLC program modification
-
Chain chip conveyor
-
Universal Hydraulic incline adjustment bar loader
-
2 ton- chain and finger bundle unscrambler
-
Maintenance kit
-
Motorized sliding out-feed conveyor table and guarding in the following lengths – 1000 mm, 2000 mm, and 3000mm
Reviews
There are no reviews yet.